B30 by Dixon Valve | Boss® Clamp | 4-Bolt Type | 2-Gripping Fingers | 2" Hose ID | Hose OD: from 3-6/64" to 3-28/64" | Zinc Plated Iron JDSTYLE_123079 (27mm) 10FFP37BS - 3/8" 10mm

(27mm) 10FFP37BS - 3/8" 10mm 8

000 psi 207 bar 3

ISO 1436-1 Type 1SN performance

Note: Suitable for pressures through SAE 100R16 2 wire braid hose

1mm 150 bar 2175 psi 29 bar 421 psi 375 lpm 99 gpm 91

B30 by Dixon Valve | Boss® Clamp | 4-Bolt Type | 2-Gripping Fingers | 2" Hose ID | Hose OD: from 3-6/64" to 3-28/64" | Zinc Plated Iron JDSTYLE_123079 (27mm) 10FFP37BS - 3/8" 10mmFeatures: 4 Bolt type clamp. 2 Gripping fingers. 2 Clamp sections. Use: The correct size Boss Clamp must be used. Bolts in Boss Clamps are designed to bend as they are tightened. This allows the clamp to conform to the hose outside diameter. Always tighten bolts to their specified torque value. Periodic re tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses. Boss Clamps are for single use only! Once removed they