Headstock Bearings: Kawasaki Z1000 Z 1000 (1981-1983) Honda CBX250 The chrome shroud length is

The chrome shroud length is 50mm

This set of steering bearings are taper roller style and have been designed to replace the original set of head stock bearings on a Kawasaki W650 / EJ650 for the above years

You will no longer need to run a resistor on the primary side as this coil has a higher spec primary side

If you need to change the bush's you can use your old ones

This set of rear shocks have been manufactured to replace the original factory shocks on a Yamaha SR250 SE for the years and models shown above

Headstock Bearings: Kawasaki Z1000 Z 1000 (1981-1983) Honda CBX250 The chrome shroud length isBrand new set of Headstock Steering Taper Roller Bearings to fit: Kawasaki (K) Z 1000 J1 J3 (1981 1983). Kawasaki (K) Z 1000 K1 LTD (1981). Kawasaki (K) Z 1000 R1 R2 (1982 1983). This set of steering bearings are taper roller style and have been designed to replace the original set of head stock bearings on a Kawasaki Z1000 KZ1000 for the above years and models. Top bearing sized ID25 x OD47 x WTH15. Bottom bearing sized ID28 x OD52 x WTH16. All sizes